Contactless safety interlocking with encoded striker for "casing / heavy door" :
Contactless "door lock" encoded detection
Contactless "door open / closed" detection
Unlock command with just one contact during serialization of products
Emergency evacuation handle
Level of performance with AWAX controller: up to PL = e
Safety category with an external controller: up to 4
Cycle before dangerous failure: B10d = 1,000,000
Bolt travel: 14 mm
Bolt diameter: 24 mm (beveled for "under-voltage" closed position or "lock" mode)
Shearing strength: 2000 N
Gap between strike and lock: 2 to 4 mm (adjustable when assembling, recommended to 4 mm)
Maximum lateral offset between strike and lock: +/- 2.5 mm
Maximum angular displacement between strike and lock: +/- 5°
Safety locking contacts: 2 x NO 2A/50V
Safety door contacts: 2 x PNP/500 mA
Unlock command: PLC-compatible (12~30 VDC/2~5 mA)
Fault Diagnosis: bolt stuck, power out of specification, temperature out of specification, electromagnet failure, serialization failure
Reset: on command
"SMART consumption" for minimal power consumption when connected in series
Auxiliary release: female triangle key 8 mm x 14.2 mm (optional)
Attachment: 4 M6 screws (screw covers supplied, screws not included)
Mounting position: 2 (door pulling, door pushing)
Material: PA6 fiberglass reinforced
Electrical connection: very resistant 50 cm PUR UL20549 cord with M23 connector or cable (contact us)
Water resistance: IP 65
Operating temperature: -15°C to +45°C
Marking: screen printed + serial no. for traceability
Reference for evacuation handle: AT
VIGILGUARD-SFR
Email : inform@eecontrols.com
EE CONTROLS SAFETY
Contact Info:
Telephone : (845) 278-5777